Akıllı Switch üzerinde ARP denemesi

HP akıllı switch üzerinde ssh ile bağlanıp komutlara baktım ama arp komutu yok :)

backup Backup next startup-configuration file to TFTP server
boot Reboot the device.
clear Clear table/statistics.
clock Display/set current time, date, and local time parameters.
command-alias Specify command alias
configure Enter the Configuration context.
copy Copy datafiles to/from the switch.
debug Enable/disable debug logging.
delete Delete a file
diagnostic-level Set the diagnostic level.
end Return to the Manager Exec context.
erase Erase stored data files.
getMIB Retrieve and display the value of the MIB objects specified.
getNextMIB Retrieve and display the value of the next MIB object for each OID specified
kill Kill other active console, Telnet, or SSH sessions.
log Display log events.
print Execute a command and redirect its output to the device channel for current session.
process-tracking Enable process tracking for active management module or specified interface modules.
reboot Reboot system/board/card
redo Re-execute a command from history.
redundancy Redundancy configuration for management modules.
reload Warm reboot of the switch.
rename Change the name of the configuration OLDNAME to NEWNAME.
repeat Repeat execution of a previous command.
reset Reset operation
restore Restore next startup-configuration file from TFTP server
return Exit to User View
save Save current configuration
schedule Schedule system task
screen-length Specify the lines displayed on one screen
services Display parameters for the services module or change the module’s state (reload or shutdown).
session Enable/disable show message type or cli interactive mode on the switch.
setMIB Set the value of a MIB object.
setup Enter the ‘Switch Setup’ screen for basic switch configuration.
ssh Initiate a SSH client session to another network device.
startup Specify system startup parameters
startup-default Set the default configuration file.
system-view Enter the System View.
task-monitor Enable the task monitoring of the specified feature.
telnet Initiate an outbound telnet session to another network device.
terminal Set the dimensions of the terminal window.
test Run diagnostic tests.
update Enter Monitor ROM Console.
upgrade-software Enter a key to upgrade system software and enable advanced features.
walkMIB Walk through all instances of the object specified displaying the MIB object names, instances and values.
write View or save the running configuration of the switch.

chassislocate Control the chassis locate LED.
dir Display a list of the files and subdirectories in a directory on a USB device.
display Display current system information.
enable Enter the Manager Exec context.
exit Return to the previous context or terminate current console/telnet session if you are in the Operator context level.
link-test Test the connection to a MAC address on the LAN.
logout Terminate this console/telnet session.
menu Change console user interface to menu system.
page Toggle paging mode.
ping Send IPv4 ping request(s) to a device on the network.
ping6 Send IPv6 ping request(s) to a device on the network.
quit Exit from current command view
services Display parameters for the services module.
show Display switch operation information.
traceroute Trace the IPv4 route to a device on the network.
traceroute6 Trace the IPv6 route to a device on the network.
verify Verify the signature of a switch firmware image.